- Brand:
AOSIF
- Item No.:
AC207
- Product Origin:
Xiamen Fujian
- Prime Power:
150KW/165KVA
- Engine:
Cummins
- Alternator:
Leroy somer /Stamford/Marathon/ AOSIF
- Frequency:
50HZ
- Controller:
Deepsea 6120
- Type:
Open
Related Presentations
AOSIF 150KW 188kva Cummins diesel generator set
General feature: 50HZ/1500rpm
Genset Model | AC206-II |
Prime Power | 150KW / 188KVA |
Standby Power | 165KW / 206KVA |
Frequency/Speed | 50Hz/1500rpm |
Standard Voltage | 230V/400V |
Phases | Three phases, four wires |
Manufacturer | Xiamen AOSIF Engineering LTD. |
Cummins Engine Data:
Manufacturer | Dongfeng Cummins Engine Co., Ltd. |
Model | 6CTA8.3-G2 |
Engine speed | 1500rpm |
Engine power | |
—————————-Standby power | 180kw / 241HP |
———————-Base output power | 163kw / 218 HP |
———————–Continuous power | 133kw /178HP |
Air intake way | after-cooled, turbo-charged |
Cylinder quantity | 6 |
Bore * Stroke | 114*135 mm |
Displacement | 8.3L |
Fuel system | BYC PB/SEGMA electrical governor |
Governor Regulation | ≤3% |
Low idle | 700-900 rpm |
Piston speed | 6.8 m/s |
Friction energy output | 17 kw |
Max. back pressure | 10kPa |
Diameter of exhaust pipe recommended | 75mm |
Maximum Static Supported Weight at the Turbocharger Outlet Flange | 14N.m |
Exhaust gas flow (prime power – standby power) | 521-578 L/sec |
Exhaust gas temperature (prime power – standby power) | 536-563 ℃ |
Max. air intake resistance | |
Dirty Element | 6kPa |
Minimum Dirt Holding Capacity with Heavy Duty Air Cleaner | 25g/cfm |
Maximum Temperature Rise from Ambient to the Inlet of the Turbocharger | 17 ℃ |
Recommended intake piping size (inner diameter) | 75mm |
Air intake flow (prime power – standby power) | 192-206 L/sec |
Normal oil pressure range | |
————idle speed | 103 kPa |
————governor speed | 276-414 kpa |
Max. oil temperature permitted in oil pan | 121 ℃ |
Minimum required lube system capacity-sump plus filters | 27.6L |
Angularity of Standard Oil Pan: (Values stated are for intermittent operation only): (any direction) | 45 ° |
Type Injection System | BYC PB direct injection |
Maximum Restriction at Lift Pump | 27 kPa |
Maximum Allowable Head on Injector Return Line (Consisting of Friction Head and Static Head) | 33.7 kPa |
Maximum Fuel Inlet Temperature | 71 ℃ |
Maximum Fuel Flow on the Supply Side of the Fuel Pump | 193kg/hr |
Coolant capacity – engine only | 12.3L |
Maximum Coolant Friction Head External to Engine | 28 kPa |
Maximum Static Head of Coolant Above Engine Crank Centerline | 18.3m |
Standard Thermostat (Modulating) Range | 82-95 ℃ |
Min. opening pressure of radiator cap | 69 kPa |
Maximum Top Tank Temperature for Standby/Prime Power | 104 / 100 ℃ |
Engine coolant flow (prime power – standby power) | 3.3 L/s |
Cranking Motor (Heavy Duty, Positive Engagement) | 12V |
Battery Charging System, Negative Ground | 63A |
Maximum Allowable Resistance of Cranking Circuit | 0.00075 Ω |
Gaseous Emissions per GB 20891-2007 | |
Weight-Specific NOx | 9.2 g/KW.h |
Weight-Specific HC | 1.3 g/KW.h |
Weight-Specific CO | 5.0 g/KW.h |
Weight-Specific Particulates | 0.54 g/KW.h |
Alternator Data:
Manufacturer | Leroy-somer Electro-technique (Fuzhou) Company Ltd. |
Model | LSA46.2 M5 |
Output power | 160KW |
AVR model | R250 |
Number of phase | 3 |
Power factor (Cos Phi) | 0.8 |
Altitude | ≤ 1000 m |
Overspeed | 2250RPM |
Number of Pole | 4 |
Exciter type | Shunt |
Insulation class | H |
Voltage regulation | ±0.5% |
protection | IP23 |
Totale Harmonic distortion THD (**) | no load < 2.5% |
Totale Harmonic distortion THD (**) | on load < 2.5% |
Wave form : NEMA = TIF | < 50 |
Bearing | single |
Coupling | Direct |
Genset Open Version Genset Soundproof Version
Open Type (Standard Configuration) | Soundproof Type |
Overall Size: 2370×840 ×1560mm(L*W*H) | Overall size: 3200× 1100×1880mm(L*W*H) |
Weight: 1730kg | Weight: 2270kg |
Our Sales Promises★ AOSIF Engineering provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment.
★ Quality Warranty is according to our standard conditions: 12 months from BL date or 1,000 running hours, whichever comes first.
★ Service and parts are available from XIAMEN AOSIF Engineering Ltd. or distributors in your location.
★ All the products from Xiamen AOSIF Engineering Ltd. is CE marked.
Technical Parameters
Reviews
There are no reviews yet.