Generator Alternator Speed governor EG3000 Engine Speed Controller

The EG3000 is a universal generator governor / engine speed controller equipped with Smoke Limiting, & Idle Speed. Suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps, also can be used with Low Current, Electric over Hydraulic Oil Pumps Type Governor Actuators

Features of EG3000

1. Works on a wide ranges of MPU/flywheel frequencies

2. 15 Amp Max output

3. Suitable for all types of diesel and gas engines

4. High sensitivity and stable at low frequency variations Moisture, vibration, and rust protected, epoxy encapsulated electronics

5. For use with isochronous generators & automatic paralleling PLC controls

6. Idle speed adjustment and connections for a remote speed POT

Operating Voltage	12 or 24 VDC ±20%
Output Current	0.5 ~ 15 A
Run Speed Adjustment range	Speed adjustment Potentiometer (30 turn); 4 Segment Dip Switch Adjustable From 600 ~ 9500 Hz.
Idle Speed Adjustment Range	Run Speed 30 ~ 85%
Ramp Time	3 ~ 20 Sec
Remote Speed Pot	Ext. Remote speed pot terminal 6, 7, 8 (ILS) and 6, 7, 9 Connect a 5K potentiometer ±5% adjustment range.
Temp. Stability	<0.01%
Run Speed Stability	± 0.25 % at steady state
MPU input signal	1 ~ 120VAC RMS
Drop	4.00%
Adjustment	Run Speed, Idle Speed, Ramp Time, Droop, Integration, Gain
Mechanical Vibration	1G @ 18 ~ 30 Hz, 2.5G @ 48 ~ 70 Hz
Relative Humidity	< 95%
Operating Temperature	-40 ~ 85℃
Storage Temperature	-40 ~ 85℃
Dimensions	147mm L * 114mm W * 50mm H
Weight	690g ± 2%