| NO. | TYPE | POWER | MAX.FLOW | MAX.HEAD | INLET/OUTLET | MAX.SUCT | N.W | PACKING DIMENSION |
| (HP) | (L/mn) | (m) | (inch) | (m) | (Kg) | (mm) | ||
| A | HCT-18S | 0.5 | 140 | 18 | 1.25″X1″ | 9 | 8.5 | 340X235X265 |
| B | HCT-20S | 0.75 | 145 | 20 | 1.25″X1″ | 9 | 9.5 | 340X235X265 |
| C | HCT-26S | 1 | 120 | 26 | 1.25″X1″” | 9 | 14 | 340X235X265 |
Applications:
Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rate. Suitable to pump clean water or non-aggressive liquid charged with small solid impurity. To be used in flow irrigation systems in gardening, agriculture and industrial fittings
Operating Conditions:
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Total Suction lift up to 9mt
Continuous duty
Motor:
Two-pole induction motor (n=2850r.p.m)
Insulation Class B
Protection IP44
Material:
Pump body: Cast iron
Motor support: Cast iron
Motor housing: Aluminum
Impeller: Brass
Shaft with rotor: 45# Steel, AISI 416 stainless steel if request
Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50Hz
Single phase 110V-127v/60Hz if request
Single/three phase 220V/60Hz if request
Reviews
There are no reviews yet.