Trans-AUTO Genset Controller

Trans-AUTO. Automatic Genset Controller
Automatic Genset Controller CanBus J1939 ECU communication, Multi language selections, USB communication, Speed sensing from Magnetic Pickup, Alternator frequency and CanBus ECU, Statistic Records, Generator phase sequence control, Exercise at programmed time intervals
Specifications
CanBus J1939 ECU Communication
LCD Languages English/Chinese, English/Deutch, English/Turkish, English/Italiano, English/Espanol, English/Francais, English/Russian
Event Logs Last 50 events with measured values
Inputs 6x Configurable digital, 4x Analogue senders, 1x Cabinet temperature, Magnetic Pickup, Charge Alternator D+(WL) inputs
Outputs Configurable 2x Relays, 4x Transistors, GBR outputs
Current Measurement 3 phases CT inputs for Load Current, 1x CT input for Earth Current
Voltage Measurement 3 phases for Alternator
Power Factor Measurement For 3 phases
Case
Dimensions 229mm x 152mm x 41mm
Panel Cut-Out 182mm x 135mm
Protection NEMA 4X IP65 at front side
Weight Approximately 0,53Kg
Ratings
DC Battery Supply range 8 to 32Vdc, max.operating current is 360mA
CT Secondary 5A
Sender Measurement 0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm
Cabin.Temp.Measuremet -50 to +100 ºC, accuracy: 1 % FS, resolution: 1 ºC.
Operating / Storage Temp. -20°C to +70°C / -30°C to +80°C
Expansions
Input /Output with Trans-I/O module
Analogue Input with Trans-Analogue module
Dual working with Trans-DUAL module